MIL-PRF-38201D
5.
PACKAGING
5.1
Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by the Inventory
Control Point packaging activity within the Military Department or Defense Agency, or within
the Military Department's System Command. Packaging data retrieval is available from the
managing Military Department or Defense Agency automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or explanatory nature which may be helpful, but
is not mandatory.)
6.1
Intended use. The valve is intended to be used with a storage and servicing liquid oxygen
tank to fill aircraft-mounted converters with liquid oxygen.
6.2
Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of this specification.
b.
Issue of the DoDISS to be cited in the solicitation, and if required, the specific
issue of individual documents referenced (see 2.2).
c.
When first article inspection is required (see 3.1).
d.
The requirement for the vendor to identify proposed coatings if aluminum or
aluminum alloys are used and anodization is not to be used (see 3.3.1).
e.
Item identification (see 3.10).
f.
Packaging requirements (see 5.1).
g.
Data required.
6.3
Anodizing. MIL-A-8625, Type I or II has been used successfully in previous
procurements as a guide for anodizing aluminum and aluminum alloys, if used.
6.4
Valve poppet. The term "poppet" in this specification is defined as the valve opening and
closing (or sealing) mechanism, and is not to be construed to mean only the spring-loaded poppet
type of valve. Tests requiring unseating or seating of the poppet should also be interpreted to
mean opening or closing of the sealing mechanism, if the valve is not of the traditional spring-
loaded poppet type of valve.
6.5
Environmental testing. Test methods are specified in MIL-STD-810E.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business